OUR COMMITMENTS
Corporate Policies
Effective November 4, 2026 · Next review: November 2027
On this page: Health and Safety · Environmental · Business Ethics and Anti-Corruption
1. Health and Safety Policy
Barin Mineral Inc. puts the health and safety of every worker, contractor, client and member of the public ahead of schedule and cost. No task is so urgent that it cannot be done safely.
Scope
This policy applies to all Barin employees, contractors and visitors, in the office, on the road, and at every field site, including client properties and mine sites.
Legal framework
Barin complies with, and where practical exceeds, the requirements of:
- the Mines Act and the Health, Safety and Reclamation Code for Mines in British Columbia (the Code), including Part 9 on exploration, for all work in, on or about a mine or exploration site;
- the Workers Compensation Act and the WorkSafeBC Occupational Health and Safety Regulation;
- the conditions of any Mines Act permit or Notice of Work authorization under which we work;
- the site-specific safety rules of each client and mine.
Where these requirements differ, Barin follows the most protective one.
Our commitments
- Identify hazards and assess risks before every program, and review them daily in the field.
- Train every worker for the tasks they perform, and keep records of that training.
- Provide and maintain safe equipment, vehicles and personal protective equipment.
- Maintain first aid coverage, attendants and supplies that meet the Code and WorkSafeBC requirements for each site.
- Hold a safety meeting or toolbox talk at the start of each field day.
- Use a written check-in procedure for anyone working alone or in remote areas, with satellite communication where cell service is not available.
- Train field crews in wildlife and bear awareness, off-road vehicle use, and wildfire precautions.
- Prohibit work while impaired by alcohol, cannabis, drugs or fatigue.
- Maintain a workplace free of bullying and harassment.
- Report incidents, near misses and reportable incidents to the client, the Inspector of Mines and WorkSafeBC as required, investigate their causes, and correct them.
- Prepare an emergency response plan for each field program, including medical evacuation routes and contacts.
Responsibilities
- Founder & CEO: accountable for this policy, for providing the resources to carry it out, and for its yearly review.
- Supervisors and field leads: apply this policy on site, lead daily safety meetings, and stop unsafe work.
- Every worker and contractor: follow safe work procedures, use required protective equipment, and report hazards and incidents at once.
Right to refuse unsafe work
Every worker has the right and the duty to refuse work they believe is unsafe. No one will face reprisal for refusing unsafe work or for raising a safety concern in good faith.
Contractors
Barin selects contractors that hold a WorkSafeBC account in good standing and that agree to meet this policy and the client's site rules.
2. Environmental Policy
Barin Mineral Inc. plans every program to leave the smallest possible footprint and to return disturbed ground to a safe, stable and productive state.
Scope
This policy applies to all Barin field programs, on our own mineral claims and on client properties, and to every employee and contractor working on them.
Legal framework
Barin complies with:
- the Mines Act and the reclamation requirements of the Health, Safety and Reclamation Code for Mines in British Columbia;
- the conditions of each Mines Act permit and Notice of Work authorization, including any reclamation security;
- the Mineral Tenure Act and its regulations;
- the Environmental Management Act, the Water Sustainability Act, the Wildlife Act, the Heritage Conservation Act, and the Wildfire Act;
- the federal Fisheries Act and Species at Risk Act, where they apply.
Our commitments
- Confirm permit requirements before any field work. We do not start work that needs a Mines Act permit until the permit is in place.
- Choose low-impact methods first, such as hand tools, existing roads and trails, and helicopter or foot access where it reduces disturbance.
- Keep work away from streams, lakes and wetlands, and protect riparian areas.
- Store and handle fuel and chemicals with spill kits on hand, and report spills as the law requires.
- Pack out all waste, and leave no flagging, sample bags or equipment behind.
- Fill sample pits and trenches, replace topsoil and vegetation, and reclaim disturbed ground as soon as practical, in line with the permit and the AME Reclamation Guide for Mineral Exploration.
- Respect wildlife timing windows and avoid disturbing dens, nests and critical habitat.
- Stop work and notify the authorities if we find a possible archaeological or heritage site.
- Follow fire danger ratings and restrictions, and carry fire suppression equipment in season.
- Prevent the spread of invasive plants by cleaning vehicles and equipment between sites.
Indigenous Nations
Barin recognizes that our work takes place on the traditional territories of Indigenous Nations. We share program plans with the relevant Nations early, listen to their concerns about land, water and wildlife, and work to address them in our programs.
Training and responsibilities
Every field worker receives an environmental orientation before starting work. The Founder & CEO is accountable for this policy. Supervisors apply it on site. Every worker reports environmental incidents at once.
Records
Barin keeps records of permits, inspections, incidents and reclamation work, and submits the annual reports that permits require.
3. Business Ethics and Anti-Corruption Policy
Barin Mineral Inc. wins and keeps work through honest dealing and the quality of what we deliver. We do not offer, pay, request or accept bribes, in any form, anywhere.
Scope
This policy applies to Barin's directors, employees, contractors and anyone acting on Barin's behalf, in Canada and abroad.
Legal framework
Barin complies with the Criminal Code of Canada, the Corruption of Foreign Public Officials Act, the Competition Act, the Personal Information Protection Act of British Columbia, and the Code of Ethics of Engineers and Geoscientists BC for all professional geoscience work.
Anti-bribery and anti-corruption
- No one may offer or accept money, gifts, favours or anything of value to gain an improper advantage or influence a decision.
- Facilitation payments to speed up routine government action are prohibited.
- Modest gifts or hospitality are allowed only if they are infrequent, reasonable in value, openly given, and could not be seen as influencing a decision. Gifts to public officials require the Founder & CEO's prior approval.
- All payments are recorded accurately in Barin's books.
Fair and transparent procurement
- Barin prepares every bid and proposal independently.
- We do not discuss prices, bids or market allocation with competitors, and we do not take part in bid-rigging.
- We select our own suppliers and contractors on merit, price, safety record and capacity, with a preference for local and Indigenous businesses where they meet those needs.
Conflicts of interest
Everyone working for Barin must disclose, in writing, any personal or financial interest that could affect their judgment on Barin's or a client's behalf, including interests in mineral claims, companies or contracts in the same area. Barin will not acquire mineral claims near a client's property using that client's confidential information.
Confidentiality and data
- Client data, results and plans are confidential. We share them only with the client's consent or as the law requires.
- We do not trade in a client's securities on the basis of information that has not been made public.
- We protect personal information and limit access to client systems and data to what each contract requires.
Honest technical work
Our technical reports, data and statements present results accurately and completely. We do not overstate results or omit material information. Professional geoscience work is carried out and signed by qualified registrants.
Reporting concerns
Anyone who suspects a breach of this policy should report it to the Founder & CEO at the contact below. Reports are treated confidentially, and no one will face retaliation for a report made in good faith. A breach may lead to termination of employment or contract and referral to the authorities.
Approval and review
These three policies take effect on the date signed below. Barin reviews them at least once a year, and after any serious incident, change in the law, or major change in our work. The Health, Safety and Reclamation Code is revised regularly; the current version was revised in June 2026.
Every employee and contractor receives a copy and confirms in writing that they have read it.
Approved by: Saman Parsi, Founder & CEO
Effective date: November 4, 2026 · Next review: November 2027
Barin Mineral Inc., British Columbia
Contact: info@barinmineral.com